UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM
CURRENT REPORT
PURSUANT TO SECTION 13 OR 15(D)
OF THE SECURITIES EXCHANGE ACT OF 1934
Date of Report (Date of earliest event reported):
(Exact name of registrant as specified in its charter)
(State or other jurisdiction of incorporation) |
(Commission File Number) |
(I.R.S. Employer Identification No.) |
(Address of principal executive offices, including zip code) |
Registrant’s telephone number, including area code:
Not Applicable
(Former name or former address, if changed since last report)
Check the appropriate box below if the Form 8-K is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions:
Written communication pursuant to Rule 425 under the Securities Act (17 CFR 230.425) |
Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12) |
Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b)) |
Pre-commencements communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c)) |
Securities registered pursuant to Section 12(b) of the Act:
Title of each class |
Trading |
Name of each exchange | ||
Indicate by check mark whether the registrant is an emerging growth company as defined in Rule 405 of the Securities Act of 1933 (§230.405 of this chapter) or Rule 12b-2 of the Securities Exchange Act of 1934 (§240.12b-2 of this chapter).
Emerging growth company
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.
Item 2.02 | Results of Operations and Financial Condition. |
On August 14, 2023, Drilling Tools International Corporation (the “Company”) issued a press release announcing the Company’s financial and operating results for the quarter ended June 30, 2023. A copy of the press release is furnished as Exhibit 99.1 hereto and incorporated herein by reference. Additional information regarding the Company’s results of operation and financial condition for the quarter is furnished as Exhibit 99.2 hereto and incorporated herein by reference.
This information in this report and the exhibits attached hereto shall not be deemed to be “filed” for purposes of the Securities Exchange Act of 1934 (the “Exchange Act”) or otherwise subject to the liabilities of that section, nor shall it be deemed incorporated by reference in any filing under the Securities Act of 1933, as amended, or the Exchange Act, regardless of any general incorporation language in such filing.
Item 9.01 | Financial Statements and Exhibits. |
(d) | Exhibits |
Exhibit No. |
Description | |
99.1 | Press release issued by Drilling Tools International Corporation on August 14, 2023. | |
99.2 | Slide Presentation of Drilling Tools International Corporation dated August 14, 2023. | |
104 | Cover Page Interactive Data File (formatted as Inline XBRL). |
-1-
SIGNATURE
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.
Dated: August 14, 2023
DRILLING TOOLS INTERNATIONAL CORPORATION | ||
By: | /s/ R. Wayne Prejean | |
Name: | R. Wayne Prejean | |
Title: | Chief Executive Officer |
-2-
Exhibit 99.1
Drilling Tools International Reports Second Quarter 2023 Financial Results
Second Quarter 2023 Revenue Grew 25% Year-over-Year to $37.9 million
Successful completion of business combination; Shares commenced trading on Nasdaq
HOUSTON, TEXAS (August 14, 2023) Drilling Tools International Corp., (DTI or the Company) (Nasdaq: DTI), a leading oilfield services company that manufactures and provides a differentiated, rental-focused offering of tools for use in horizontal and directional drilling, operating from 22 locations across North America, Europe and the Middle East, today reported its financial and operational results for the quarter ended June 30, 2023.
Second Quarter Financial Highlights
| Net Revenue of $37.9 million increased 25% from $30.4 million in Q2 2022 |
| Operating expenses of $(31.3) million were higher compared to $(22.3) million in Q2 2022 |
| Net Income was $0.9 million, compared to $5.9 million in Q2 2022 |
| Diluted Earnings Per Share was $0.05, compared to $0.30 in Q2 2022 |
| Adjusted EBITDA was $13.3 million, compared to $8.8 million in Q2 2022 |
Operational and Business Highlights
| Completed business combination with ROC Energy Acquisition Corp. |
| Became a publicly traded company, commencing trading on Nasdaq on June 21, under the ticker DTI |
| In June, announced the appointment of Thomas Roe Patterson to the DTI Board of Directors. Mr. Patterson is an independent director and serves as a member of the Audit Committee |
| Earlier this year, DTI announced an exclusive U.S. distribution agreement for RotoSteer, a versatile tool which provides continuous rotation to the drill string while controlling the attached bottom hole assembly in rotational or sliding mode |
Our first financial results report as a public company represents an important milestone for DTI as a new publicly traded company, said Wayne Prejean, CEO of DTI. While rig activity in North America has slowed approximately 13% since the beginning of the year, DTI has executed well, with first half results in-line with our forecasts. The Company remains in a strong financial position as we seek to increase shareholder value and thoughtfully execute on growth opportunities going forward.
Second Quarter 2023 Financial and Operating Results
In the second quarter the Company generated Net Tool Rental Revenue of $29.0 million, which was an increase of 26% compared to the second quarter of 2022. This increase was primarily driven by increased market activity and customer pricing across all divisions.
Product Sales Net Revenue in the second quarter totaled $8.9 million, an increase of 21% compared to the second quarter of 2022. The increase was primarily driven by increased market activity and customer pricing across all divisions, including rental tool recovery sales revenue.
Second quarter 2023 Operating Expenses were $(31.3) million, compared to $(22.3) million in the second quarter of 2022. The increase was primarily driven by higher personnel expenses, professional services related to the Public Company Audit Oversight Board audit, and expenses related to public company readiness projects.
Second quarter 2023 Net Income was $0.9 million, or $0.05 per diluted share, compared to Net Income of $5.9 million, or $0.30 per diluted share, in the prior year quarter. Factors contributing to that decline included transaction related expenses, higher personnel related expenses, negative foreign currency losses, unavailability of tax credits that the Company benefited from in 2022, and higher costs related to greater Directional Tool Rental activity. These negative impacts were partially offset by increased market activity and customer pricing across all divisions.
Second quarter 2023 Adjusted EBITDA was $13.3 million, compared to Adjusted EBITDA of $8.8 million in the prior year quarter. The increase was primarily driven by increased market activity and customer pricing across all divisions, including rental tool recovery sales revenue.
At June 30, 2023 the Company had $7.2 million of cash and cash equivalents. DTI retains strong financial flexibility with access to an undrawn $60 million revolving line of credit.
Outlook
Rig activity in North America has declined by approximately 13% since January of this year. While our Permian business has continued to be resilient and we believe the rig count decline is likely to be nearing bottom, in recognition of current market conditions and the impact of the rig count contraction, we are adjusting our expectations for the third and fourth quarters of 2023 and our full year 2023 projections downward.
Full Year 2023
| Revenue: $150 158 million |
| Adjusted EBITDA: $50 54 million |
| Gross Capital Expenditures: $44 46 million |
| Net Income: $12 19 million |
| Adjusted Free Cash Flow(1): $6 8 million |
(1) | Adjusted Free Cash Flow defined as Adjusted EBITDA less Gross Capital Expenditures |
About DTI
DTI, with roots dating back to 1984, is a Houston, Texas based leading oilfield services company that manufactures and rents downhole drilling tools used in horizontal and directional drilling of oil and natural gas wells. DTI operates from 22 locations across North America, Europe and the Middle East. To learn more about DTI visit: www.drillingtools.com.
Forward-Looking Statements
This press release may include, and oral statements made from time to time by representatives of the Company may include, forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. Statements regarding the business combination and the financing thereof, and related matters, as well as all other statements other than statements of historical fact included in this press release are forward-looking statements. The words anticipate, believe, continue, could, estimate, expect, intends, may, might, plan, possible, potential, predict, project, should, will, would and similar expressions may identify forward-looking statements, but the absence of these words does not mean that a statement is not forward looking. These forward-looking statements include, but are not limited to, statements regarding DTI and its management teams expectations, hopes, beliefs, intentions or strategies
regarding the future. In addition, any statements that refer to projections, forecasts or other characterizations of future events or circumstances, including any underlying assumptions, are forward-looking statements. Forward looking statements in this press release may include, for example, statements about: (1) the demand for DTIs products and services, which is influenced by the general level activity in the oil and gas industry; (2) DTIs ability to retain its customers, particularly those that contribute to a large portion of its revenue; (3) DTIs ability to remain the sole North American distributor of the Drill-N-Ream; (4) DTIs ability to employ and retain a sufficient number of skilled and qualified workers, including its key personnel; (5) DTIs ability to market its services in a competitive industry; (9) DTIs ability to execute, integrate and realize the benefits of acquisitions, and manage the resulting growth of its business; (6) potential liability for claims arising from damage or harm caused by the operation of DTIs tools, or otherwise arising from the dangerous activities that are inherent in the oil and gas industry; (7) DTIs ability to obtain additional capital; (8) potential political, regulatory, economic and social disruptions in the countries in which DTI conducts business, including changes in tax laws or tax rates; (9) DTIs dependence on its information technology systems, in particular Customer Order Management Portal and Support System, for the efficient operation of DTIs business; (10) DTIs ability to comply with applicable laws, regulations and rules, including those related to the environment, greenhouse gases and climate change; (11) DTIs ability to maintain an effective system of disclosure controls and internal control over financial reporting; (12) the potential for volatility in the market price of DTIs common stock; (13) the impact of increased legal, accounting, administrative and other costs incurred as a public company, including the impact of possible shareholder litigation; (14) the potential for issuance of additional shares of DTIs common stock or other equity securities; (15) DTIs ability to maintain the listing of its common stock on Nasdaq; and (16) other risks and uncertainties separately provided to you and indicated from time to time described in filings and potential filings by DTI with the Securities and Exchange Commission (the SEC). You should carefully consider the risks and uncertainties described in the definitive proxy statement/prospectus/consent solicitation statement with the SEC by the Company on May 12, 2023 (the Proxy Statement), and the information presented in DTIs current report on Form 8-K filed June 27, 2023 (the 8-K) and the quarterly report on Form 10-Q filed August [14], 2023 (the 10-Q). Such forward-looking statements are based on the beliefs of management of DTI, as well as assumptions made by, and information currently available to DTIs management. Actual results could differ materially from those contemplated by the forward-looking statements as a result of certain factors detailed in the Proxy Statement, the 8-K or the 10-Q. All subsequent written or oral forward-looking statements attributable to the Company or persons acting on its behalf are qualified in their entirety by this paragraph. Forward-looking statements are subject to numerous conditions, many of which are beyond the control of each of DTI, including those set forth in the Risk Factors section of the Proxy Statement, and described in the 8-K and the 10-Q. The Company undertakes no obligation to update these statements for revisions or changes after the date of this release, except as required by law.
Investor Relations
Sioban Hickie, ICR, Inc.
InvestorRelations@drillingtools.com
Drilling Tools International Corporation
Unaudited Condensed Consolidated Statement of Operations and Comprehensive Income
(in thousands, except share data)
Three Months Ended June 30 | ||||||||
2023 | 2022 | |||||||
Revenue, net |
||||||||
Tool rental |
$ | 29,002 | $ | 23,024 | ||||
Product sale |
8,906 | 7,348 | ||||||
|
|
|
|
|||||
Total revenue, net |
37,908 | 30,372 | ||||||
Operating costs and expenses |
||||||||
Costs of tool rental revenue |
7,692 | 6,678 | ||||||
Costs of product sale revenue |
1,157 | 1,262 | ||||||
Selling, general and administrative expense |
17,718 | 9,498 | ||||||
Depreciation and amortization expense |
4,717 | 4,886 | ||||||
|
|
|
|
|||||
Total operating costs and expenses |
31,284 | 22,324 | ||||||
|
|
|
|
|||||
Income from Operations |
6,624 | 8,048 | ||||||
Other (expense) income |
||||||||
Interest income (expense), net |
(348 | ) | (213 | ) | ||||
Gain (loss) on sale of property |
(1 | ) | | |||||
Unrealized gain (loss) on equity securities |
420 | (87 | ) | |||||
Other expense, net |
(4,382 | ) | (23 | ) | ||||
|
|
|
|
|||||
Total other (expense) income, net |
(4,311 | ) | (323 | ) | ||||
|
|
|
|
|||||
Income before income tax (expense) benefit |
2,313 | 7,725 | ||||||
Income tax expense |
(1,376 | ) | (1,791 | ) | ||||
|
|
|
|
|||||
Net Income |
$ | 937 | $ | 5,934 | ||||
Accumulated dividends on redeemable convertible preferred stock |
| 295 | ||||||
|
|
|
|
|||||
Net Income Available to Common Shareholders |
$ | 937 | $ | 5,639 | ||||
Basic earnings per share |
$ | 0.07 | $ | 0.47 | ||||
Diluted earnings per share |
$ | 0.05 | $ | 0.30 | ||||
Basic weighted-average common shares outstanding |
13,910,670 | 11,951,123 | ||||||
Diluted weighted-average common shares outstanding |
20,746,976 | 19,677,493 | ||||||
Comprehensive income |
||||||||
Net Income |
$ | 937 | $ | 5,934 | ||||
Foreign currency translation adjustment, net of tax |
(207 | ) | 13 | |||||
|
|
|
|
|||||
Net Comprehensive Income |
$ | 730 | $ | 5,947 | ||||
|
|
|
|
Drilling Tools International Corporation
Unaudited Condensed Consolidated Statement of Operations and Comprehensive Income
(in thousands, except share data)
Six Months Ended June 30 | ||||||||
2023 | 2022 | |||||||
Revenue, net |
||||||||
Tool rental |
$ | 61,278 | $ | 43,440 | ||||
Product sale |
17,429 | 12,909 | ||||||
|
|
|
|
|||||
Total revenue, net |
78,707 | 56,349 | ||||||
Operating costs and expenses |
||||||||
Costs of tool rental revenue |
15,829 | 12,992 | ||||||
Costs of product sale revenue |
2,460 | 2,413 | ||||||
Selling, general and administrative expense |
34,447 | 21,732 | ||||||
Depreciation and amortization expense |
9,732 | 9,962 | ||||||
|
|
|
|
|||||
Total operating costs and expenses |
62,468 | 47,099 | ||||||
|
|
|
|
|||||
Income from Operations |
16,239 | 9,250 | ||||||
Other (expense) income |
||||||||
Interest income (expense), net |
(922 | ) | 4 | |||||
Gain (loss) on sale of property |
68 | 5 | ||||||
Unrealized gain (loss) on equity securities |
387 | 323 | ||||||
Other expense, net |
(6,035 | ) | (95 | ) | ||||
|
|
|
|
|||||
Total other (expense) income, net |
(6,502 | ) | 237 | |||||
|
|
|
|
|||||
Income before income tax (expense) benefit |
9,737 | 9,487 | ||||||
Income tax expense |
(3,099 | ) | (2,220 | ) | ||||
|
|
|
|
|||||
Net Income |
$ | 6,638 | $ | 7,267 | ||||
Accumulated dividends on redeemable convertible preferred stock |
314 | 589 | ||||||
|
|
|
|
|||||
Net Income Available to Common Shareholders |
$ | 6,324 | $ | 6,678 | ||||
Basic earnings per share |
$ | 0.49 | $ | 0.56 | ||||
Diluted earnings per share |
$ | 0.33 | $ | 0.37 | ||||
Basic weighted-average common shares outstanding |
12,936,310 | 11,951,123 | ||||||
Diluted weighted-average common shares outstanding |
20,217,648 | 19,677,493 | ||||||
Comprehensive income |
||||||||
Net Income |
$ | 6,638 | $ | 7,267 | ||||
Foreign currency translation adjustment, net of tax |
(207 | ) | (62 | ) | ||||
|
|
|
|
|||||
Net Comprehensive Income |
$ | 6,431 | $ | 7,205 | ||||
|
|
|
|
Drilling Tools International Corporation
Unaudited Condensed Consolidated Balance Sheets
(in thousands, except share data)
June 30, 2023 | December 31, 2022 | |||||||
ASSETS |
||||||||
Current Assets |
||||||||
Cash |
$ | 7,156 | $ | 2,352 | ||||
Accounts receivable, net |
30,357 | 28,998 | ||||||
Inventories, net |
5,929 | 3,281 | ||||||
Prepaid expenses and other current assets |
6,804 | 4,381 | ||||||
Investment - equity securities, at fair value |
1,530 | 1,143 | ||||||
|
|
|
|
|||||
Total Current Assets |
51,776 | 40,155 | ||||||
Property, plant and equipment, net |
64,450 | 44,154 | ||||||
Operating lease right-of-use asset |
20,397 | 20,037 | ||||||
Intangible assets, net |
239 | 263 | ||||||
Deferred financing costs, net |
472 | 226 | ||||||
Deposits and other long-term assets |
963 | 383 | ||||||
|
|
|
|
|||||
Total Assets |
$ | 138,297 | $ | 105,218 | ||||
|
|
|
|
|||||
LIABILITIES, REDEEMABLE CONVERTIBLE PREFERRED STOCK AND SHAREHOLDERS EQUITY |
||||||||
Current Liabilities |
||||||||
Accounts payable |
$ | 19,530 | $ | 7,281 | ||||
Accrued expenses and other current liabilities |
12,629 | 7,299 | ||||||
Current portion of operating lease liabilities |
3,836 | 3,311 | ||||||
Revolving line of credit |
| 18,349 | ||||||
|
|
|
|
|||||
Total Current Liabilities |
35,995 | 36,240 | ||||||
Operating lease liabilities, less current portion |
16,622 | 16,691 | ||||||
Deferred tax liabilities, net |
5,193 | 3,185 | ||||||
|
|
|
|
|||||
Total Liabilities |
$ | 57,810 | $ | 56,116 | ||||
|
|
|
|
|||||
Commitments and Contingencies (See Note 15) |
||||||||
Redeemable Convertible Preferred Stock |
||||||||
Series A redeemable convertible preferred stock, par value $0.01; nil shares and 30,000,000 shares authorized at June 30, 2023 and December 31, 2022, respectively; nil shares and 6,719,641 shares issued and outstanding at June 30, 2023 and December 31, 2022, respectively |
| 17,878 | ||||||
Shareholders Equity |
||||||||
Common stock, par value $0.0001; 500,000,000 and 65,000,000 shares authorized at June 30, 2023 and December 31, 2022, respectively; 29,768,535 shares and 11,951,123 shares issued and outstanding at June 30, 2023 and December 31, 2022, respectively |
3 | 1 | ||||||
Preferred stock, par value $0.0001; 10,000,000 and nil shares authorized at June 30, 2023 and December 31, 2022, respectively; nil shares issued and outstanding at June 30, 2023 and December 31, 2022, respectively |
| | ||||||
Additional paid-in-capital |
95,218 | 52,388 | ||||||
Accumulated deficit |
(14,416 | ) | (21,054 | ) | ||||
Less treasury stock, at cost; nil shares at June 30, 2023 and December 31, 2022 |
| | ||||||
Accumulated other comprehensive loss |
(318 | ) | (111 | ) | ||||
|
|
|
|
|||||
Total Shareholders Equity |
80,487 | 31,224 | ||||||
|
|
|
|
|||||
TOTAL LIABILITIES, REDEEMABLE CONVERTIBLE PREFERRED STOCK AND SHAREHOLDERS EQUITY |
$ | 138,297 | $ | 105,218 | ||||
|
|
|
|
Drilling Tools International Corporation
Unaudited Condensed Consolidated Statement of Cash Flows
(In thousands)
Six Months Ended | ||||||||
June 30, 2023 | June 30, 2022 | |||||||
Cash Flows from Operating Activities |
| |||||||
Net Income |
$ | 6,638 | $ | 7,267 | ||||
Adjustments to Reconcile Net Income (Loss) to Net Cash from Operations |
| |||||||
Depreciation and amortization |
9,732 | 9,962 | ||||||
Amortization of deferred financing costs |
37 | 69 | ||||||
Amortization of debt discount |
| 35 | ||||||
Non-cash lease expense |
2,275 | 2,395 | ||||||
Provision for excess and obsolete inventory |
19 | 2 | ||||||
Provision for excess and obsolete property and equipment |
238 | 272 | ||||||
Bad debt expense |
418 | 140 | ||||||
Deferred tax expense |
2,008 | 1,737 | ||||||
Gain on sale of property |
(68 | ) | (5 | ) | ||||
Unrealized (gain) on equity securities |
(387 | ) | (323 | ) | ||||
Unrealized (gain) on interest rate swap |
91 | (998 | ) | |||||
Gross profit from sale of lost-in-hole equipment |
(9,146 | ) | (6,432 | ) | ||||
Stock based compensation expense |
3,986 | | ||||||
Changes in Assets and Liabilities |
| |||||||
Accounts receivable, net |
(1,777 | ) | (6,041 | ) | ||||
Prepaid expenses and other current assets |
(1,531 | ) | (1,748 | ) | ||||
Inventories, net |
1,409 | (543 | ) | |||||
Operating lease liabilities |
(2,179 | ) | (2,407 | ) | ||||
Accounts payable |
1,982 | (2,514 | ) | |||||
Accrued expenses and other current liabilities |
316 | 1,310 | ||||||
|
|
|
|
|||||
Net Cash from Operating Activities |
14,061 | 2,178 | ||||||
|
|
|
|
|||||
Cash Flows From Investing Activities |
| |||||||
Proceeds from sale of property and equipment |
126 | 80 | ||||||
Purchase of property, plant and equipment |
(24,617 | ) | (9,169 | ) | ||||
Proceeds from sale of lost-in-hole equipment |
11,103 | 8,983 | ||||||
|
|
|
|
|||||
Net Cash from Investing Activities |
(13,388 | ) | (106 | ) | ||||
|
|
|
|
|||||
Cash Flows From Financing Activities |
| |||||||
Proceeds from merger and PIPE financing, net of transaction costs |
23,162 | | ||||||
Payment of deferred financing costs |
(281 | ) | | |||||
Proceeds from revolving line of credit |
71,646 | 49,659 | ||||||
Payments on revolving line of credit |
(89,995 | ) | (51,494 | ) | ||||
Payment to capital leases |
| (10 | ) | |||||
Payments to holders of DTIH redeemable convertible preferred stock in connection with retiring their DTI stock upon merger |
(194 | ) | | |||||
|
|
|
|
|||||
Net Cash Provided by Financing Activities |
4,338 | (1,845 | ) | |||||
|
|
|
|
|||||
Effect of Changes in Foreign Exchange Rates |
(207 | ) | (62 | ) | ||||
Net Change in Cash |
4,804 | 165 | ||||||
Cash at Beginning of Period |
2,352 | 52 | ||||||
|
|
|
|
|||||
Cash at End of Period |
$ | 7,156 | $ | 217 | ||||
|
|
|
|
Drilling Tools International Corporation
Unaudited Condensed Consolidated Statement of Cash Flows
(In thousands)
Six Months Ended | ||||||||
June 30, 2023 | June 30, 2022 | |||||||
Supplemental Disclosures of Cash Flow Information: |
||||||||
Cash paid for interest |
$ | 851 | $ | 514 | ||||
|
|
|
|
|||||
Cash paid for income taxes |
$ | 2,139 | $ | 1,203 | ||||
|
|
|
|
|||||
Non-Cash Investing and Financing Activities |
||||||||
ROU assets obtained in exchange for lease liabilities |
$ | 2,635 | $ | 399 | ||||
|
|
|
|
|||||
Purchases of inventory included in accounts payable and accrued expenses and other current liabilities |
$ | 4,076 | $ | 860 | ||||
|
|
|
|
|||||
Purchases of property and equipment included in accounts payable and accrued expenses and other current liabilities |
$ | 7,640 | $ | 451 | ||||
|
|
|
|
|||||
Non-cash directors and officers insurance |
$ | 1,472 | $ | | ||||
|
|
|
|
|||||
Non-cash merger financing |
$ | 2,000 | $ | | ||||
|
|
|
|
|||||
Exchange of DTIH redeemable convertible preferred stock for DTIC Common Stock in connection with Merger |
$ | 7,193 | $ | | ||||
|
|
|
|
|||||
Issuance of DTIC Common Stock to former holders of DTIH redeemable convertible preferred stock in connection with Exchange Agreements |
$ | 10,805 | $ | | ||||
|
|
|
|
|||||
Deferred financing fees included in accounts payable |
$ | 2 | $ | | ||||
|
|
|
|
|||||
Accretion of redeemable convertible preferred to redemption value |
$ | 314 | $ | 589 | ||||
|
|
|
|
Use of Non-GAAP Financial Measures
To supplement its unaudited interim consolidated financial statements, which are prepared and presented in accordance with GAAP, the Company uses certain non-GAAP financial measures to understand and evaluate its core operating performance. These non-GAAP financial measures, which may be different than similarly titled measures used by other companies, are presented to enhance investors overall understanding of the Companys financial performance and should not be considered a substitute for, or superior to, the financial information prepared and presented in accordance with GAAP.
The Company uses the non-GAAP financial measure Adjusted EBITDA, which is defined as net income (loss), excluding interest income; interest expense; other income (expense), net; income tax benefit (expense); depreciation and amortization; and certain other non-cash or non-recurring items impacting net income (loss) from time to time. The Company believes that Adjusted EBITDA helps identify underlying trends in its business that could otherwise be masked by the effect of the expenses that the Company excludes in Adjusted EBITDA.
The Company uses the non-GAAP financial measure Adjusted Free Cash Flow, which is defined as Adjusted EBITDA, reduced by gross capital expenditures. The Company believes Adjusted Free Cash Flow is an important liquidity measure of the cash that is available, after capital expenditures, for operational expenses and investment in its business and is a key financial indicator used by management. Adjusted Free Cash Flow is useful to investors as a liquidity measure because it measures the Companys ability to generate or use cash. Once the Companys business needs and obligations are met, cash can be used to maintain a strong balance sheet and invest in future growth.
These non-GAAP financial measures should not be considered in isolation from, or as substitutes for, financial information prepared in accordance with GAAP. There are a number of limitations related to the use of these non-GAAP financial measures compared to the closest comparable GAAP measure. Some of these limitations are that:
| Adjusted EBITDA excludes certain recurring, non-cash charges such as depreciation of fixed assets and amortization of acquired intangible assets and, although these are non-cash charges, the assets being depreciated and amortized may have to be replaced in the future; |
| Adjusted EBITDA excludes income tax benefit (expense); and |
| Adjusted Free Cash Flow does not reflect the Companys future contractual commitments. |
Reconciliations of Non-GAAP Financial Measures
The following tables present a reconciliation of Net Income (Loss) to Adjusted EBITDA for the three months ended June 30, 2023 and 2022 (non-recurring transaction expenses recorded to other (income) expense are presented separately within Adjusted EBITDA):
Drilling Tools International Corporation
Reconciliation of GAAP to Non-GAAP Measures (Unaudited)
(In thousands)
Three Months Ended | ||||||||
June 30, 2023 | June 30, 2022 | |||||||
Net Income |
$ | 937 | $ | 5,934 | ||||
Add (deduct) |
||||||||
Income tax expense |
1,376 | 1,791 | ||||||
Depreciation and Amortization |
4,717 | 4,886 | ||||||
Interest expense, net |
348 | 213 | ||||||
Stock option expense |
1,661 | | ||||||
Monitoring fees |
262 | 105 | ||||||
Gain on sale of property |
1 | | ||||||
Unrealized (gain) loss on equity securities |
(420 | ) | 87 | |||||
Transaction expense |
4,142 | | ||||||
ERC credit received |
| (4,272 | ) | |||||
Other expense, net |
241 | 23 | ||||||
|
|
|
|
|||||
Adjusted EBITDA |
$ | 13,265 | $ | 8,767 | ||||
|
|
|
|
The following table presents a reconciliation of full year 2023 Estimated Net Income (Loss) to Estimated Adjusted EBITDA:
Drilling Tools International Corporation
Reconciliation of GAAP to Non-GAAP Measures (Unaudited)
(In thousands)
2023E | ||||
Net Income |
$ | 11,500 - 19,000 | ||
Add (deduct) |
| |||
Interest expense, net |
500 - 1,500 | |||
Income tax expense |
5,000 - 6,000 | |||
Depreciation and amortization |
21,500 - 22,500 | |||
Monitoring fees |
500 - 1,000 | |||
Stock option expense |
1,661 | |||
Transaction expense |
5,838 | |||
|
|
|||
Adjusted EBITDA |
$ | 50,000 - 54,000 | ||
|
|
The following table presents a reconciliation of full year 2023 Estimated Net Income (Loss) to Estimated Adjusted Free Cash Flow:
Drilling Tools International Corporation
Reconciliation of GAAP to Non-GAAP Measures (Unaudited)
(In thousands)
2023E | ||||
Net Income |
$ | 11,500 - 19,000 | ||
Add (deduct) |
| |||
Interest expense, net |
500 - 1,500 | |||
Income tax expense |
5,000 - 6,000 | |||
Depreciation and amortization |
21,500 - 22,500 | |||
Monitoring fees |
500 - 1,000 | |||
Stock option expense |
1,661 | |||
Transaction expense |
5,838 | |||
Gross capital expenditures |
(44,000) - (46,000 | ) | ||
|
|
|||
Adjusted Free Cash Flow |
$ | 6,000 - 8,000 | ||
|
|
Source: Drilling Tools International Corp.
Exhibit 99.2 Investor Presentation August 2023
Disclaimers General: Drilling Tools International Corporation (“DTI”) is making this presentation available in connection with the release of its financial results for the six months ended June 30, 2023. The information contained in this presentation does not purport to be all-inclusive or to contain all information that prospective investors may require. Prospective investors are encouraged to conduct their own analysis and review of information contained in this presentation as well as important additional information through the Securities and Exchange Commission’s (“SEC”) EDGAR system at www.sec.gov and on our website at www.drillingtools.com. Forward-Looking Statements: This presentation and the oral statements made in connection herewith include “forward-looking statements” within the meaning of the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995. DTI’s actual results may differ from its expectations, estimates and projections, and, consequently, you should not rely on these forward-looking statements as predictions of future events. The words “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “intends,” “may,” “might,” “plan,” “possible,” “potential,” “predict,” “project,” “should,” “will,” “would” and similar expressions may identify forward-looking statements, but the absence of these words does not mean that a statement is not forward looking. These forward- looking statements include, but are not limited to, statements regarding DTI and its management team’s expectations, hopes, beliefs, intentions or strategies regarding the future. In addition, any statements that refer to projections, forecasts or other characterizations of future events or circumstances, including any underlying assumptions, are forward-looking statements. Forward-looking statements in this presentation may include, for example, statements about: (1) the demand for DTI’s products and services, which is influenced by the general level activity in the oil and gas industry; (2) DTI’s ability to retain its customers, particularly those that contribute to a large portion of its revenue; (3) DTI’s ability to remain the sole North American distributor of the Drill-N-Ream; (4) DTI’s ability to employ and retain a sufficient number of skilled and qualified workers, including its key personnel; (5) DTI’s ability to market its services in a competitive industry; (9) DTI’s ability to execute, integrate and realize the benefits of acquisitions, and manage the resulting growth of its business; (6) potential liability for claims arising from damage or harm caused by the operation of DTI’s tools, or otherwise arising from the dangerous activities that are inherent in the oil and gas industry; (7) DTI’s ability to obtain additional capital; (8) potential political, regulatory, economic and social disruptions in the countries in which DTI conducts business, including changes in tax laws or tax rates; (9) DTI’s dependence on its information technology systems, in particular Customer Order Management Portal and Support System, for the efficient operation of DTI’s business; (10) DTI’s ability to comply with applicable laws, regulations and rules, including those related to the environment, greenhouse gases and climate change; (11) DTI’s ability to maintain an effective system of disclosure controls and internal control over financial reporting; (12) the potential for volatility in the market price of DTI’s common stock; (13) the impact of increased legal, accounting, administrative and other costs incurred as a public company, including the impact of possible shareholder litigation; (14) the potential for issuance of additional shares of DTI’s common stock or other equity securities; (15) DTI’s ability to maintain the listing of its common stock on Nasdaq; and (16) other risks and uncertainties separately provided to you and indicated from time to time described in filings and potential filings by DTI with the SEC. These forward looking statements are based on DTI’s management's current expectations and assumptions about future events and are based on currently available information as to the outcome and timing of future events. DTI cautions that the foregoing list of factors is not exclusive and not to place undue reliance upon any forward-looking statements, including projections, which speak only as of the date made. You should also carefully consider the risks and uncertainties described in “Risk Factors” in the Appendix to this presentation, as well as the “Risk Factors” section of DTI’s proxy statement/prospectus/consent solicitation statement filed on May 12, 2023, and the information presented in DTI’s current report on Form 8-K filed June 27, 2023, the quarterly report on Form 10-Q filed August [14], 2023 and in subsequent quarterly reports on Form 10-Q filed with the SEC. These filings or potential filings may identify and address other important risks and uncertainties that could cause actual events and results to differ materially from those contained in the forward-looking statements referred hereto. DTI undertakes no obligation to and accepts no obligation to release publicly any updates or revisions to any forward-looking statements or to reflect any change in its expectations or any change in events, conditions or circumstances on which any such statement is based. Industry, Market Data and Partnerships: In this presentation, DTI relies on and refers to certain information and statistics regarding the markets and industries in which DTI competes. Such information and statistics are based on management’s estimates and/or obtained from third-party sources, including reports by market research firms and company filings. While DTI believes such third-party information is reliable, there can be no assurance as to the accuracy or completeness of the indicated information. DTI has not independently verified the accuracy or completeness of the information provided by the third-party sources. This presentation contains descriptions of certain key business partnerships of DTI. These descriptions are based on DTI’s management team’s discussion with such counterparties, certain non-binding written agreements and the latest available information and estimates as of the date of this presentation. Use of Projections: This presentation contains projected financial information with respect to DTI. Such projected financial information constitutes forward-looking information, is for illustrative purposes only and should not be relied upon as necessarily being indicative of future results. Further, illustrative presentations are not necessarily based on management’s projections, estimates, expectations or targets but are presented for illustrative purposes only. DTI’s independent auditors have not audited, reviewed, compiled or performed any procedures with respect to the projections for the purpose of their inclusion in this presentation, and, accordingly, they did not express an opinion or provide any other form of assurance with respect thereto for the purpose of this presentation. The assumptions and estimates underlying such financial forecast information are inherently uncertain and are subject to a wide variety of significant business, economic, competitive and other risks and uncertainties. See “Forward-Looking Statements” above. Actual results may differ materially from the results contemplated by the financial forecast information contained in this presentation, and the inclusion of such information in this presentation is not intended, and should not be regarded, as a representation by any person that the results reflected in such forecasts will be achieved. Further, the metrics referenced in this presentation regarding select aspects of DTI’s operations were selected by DTI on a subjective basis. Such metrics are provided solely for illustrative purposes to demonstrate elements of DTI’s business, are incomplete and are not necessarily indicative of DTI’s performance or future performance or overall operations. There can be no assurance that historical trends will continue. Any investment in DTI’s common stock entails a high degree of risk. No assurance can be given that investors will receive a return on their capital, and investors could lose part or all of their investment. Non-GAAP Financial Measures: This presentation includes certain financial measures not presented in accordance with generally accepted accounting principles (“GAAP”), including, but not limited to: Adjusted EBITDA, Adjusted Free Cash Flow, and certain ratios and other metrics derived therefrom. Note that other companies may calculate these non-GAAP financial measures differently, and, therefore, such financial measures may not be directly comparable to similarly titled measures of other companies. Further, these non-GAAP financial measures are not measures of financial performance in accordance with GAAP and may exclude items that are significant in understanding and assessing DTI’s financial results. Therefore, these measures should not be considered in isolation or as an alternative to net income (loss), net cash (used in) provided by operating activities or other measures of profitability, liquidity or performance under GAAP. You should be aware that DTI’s presentation of these measures may not be comparable to similarly titled measures used by other companies. DTI believes these non-GAAP measures provide useful information to management and investors regarding certain financial and business trends relating to DTI’s results of operations. DTI believes that the use of these non-GAAP financial measures provides an additional tool for investors to use in evaluating ongoing operating results and trends in DTI, and in comparing DTI’s financial measures with those of other similar companies, many of which present similar non-GAAP financial measures to investors. These non-GAAP financial measures are subject to inherent limitations as they reflect the exercise of judgment by management about which items of expense and income are excluded or included in determining these non-GAAP financial measures. Please refer to footnotes where presented on each page of this presentation or to the tables herein for a reconciliation of these measures to what DTI believes are the most directly comparable measure evaluated in accordance with GAAP. Reconciliation of historical non-GAAP measures to comparable GAAP measures are provided in the Appendix. This presentation also includes certain projections of non-GAAP financial measures. 1
Disclaimers (Cont’d) Rounding: Certain monetary amounts, percentages and other figures included in this presentation have been subject to rounding adjustments. Certain other amounts that appear in this presentation may not sum due to rounding. Trademarks: This presentation contains trademarks, service marks, trade names and copyrights of DTI and other companies, which are the property of their respective owners. Solely for convenience, some of the trademarks, service marks, trade names and copyrights referred to in this presentation may be listed without the TM, SM, © or ® symbols, but DTI will assert, to the fullest extent under applicable law, the rights of the applicable owners, if any, to these trademarks, service marks, trade names and copyrights. Further, third-party logos included in this presentation may represent past or present vendors or suppliers of materials and/or products to DTI for use in connection with its business or may be provided simply for illustrative purposes only. Inclusion of such logos does not necessarily imply affiliation with or endorsement by such firms or businesses. There is no guarantee that DTI will work, or continue to work, with any of the firms or businesses whose logos are included herein in the future. 2
Table of Contents Business Overview 4 Financial Overview and Growth Opportunities 26 Appendix 30 Recent Milestones 36 3
Business & Market Overview 4
Significant Industry Tailwinds & Supportive Macro Backdrop A combination of elevated commodity prices, increased rig count and capital spending creates a highly constructive market backdrop (1) (2) Historical Rig Count Historical Commodity Pricing $140 $10 WTI Oil Henry Hub Natural Gas North America Rest of World 2,500 $120 $8 2,000 $100 $6 $80 1,500 $60 $4 1,000 $40 500 $2 $20 - $- $- Jan-20 Jul-20 Jan-21 Jul-21 Jan-22 Jul-22 Jan-23 Jan-20 Jul-20 Jan-21 Jul-21 Jan-22 Jul-22 Jan-23 Jul-23 (3) (4) Historical Feet Drilled E&P Capital Spending 35 Global United States $600 $300 30 $500 $250 25 20 $400 $200 15 $300 $150 10 $200 $100 5 - $100 $50 $- $- 2020 2021 2022 2023E 1) Baker Hughes; 2) Energy Information Association; 3) Spears Directional Drilling Market Report – Q2 2023. Only includes number of feet drilled through reservoir rock, excludes vertical part of well; 5 4) Evercore ISI Annual Capital Spending Survey Millions of Feet Q1 2020 Q2 2020 Q3 2020 Q4 2020 Q1 2021 Q2 2021 Q3 2021 Q4 2021 Q1 2022 Q2 2022 Q3 2022 Q4 2022 Q1 2023 Q2 2023 Q3 2023E Q4 2023E Q1 2024E Q2 2024E Q3 2024E Q4 2024E Global Capital Spending ($ Bn) United States Capital Spending ($ Bn)
DTI is a Leading Rental Provider of Mission Critical Drilling Tools A platform developed and designed to keep up with the ever-changing requirement of our customers 65,000+ Global ~40 years 4 segments DTI manages & DTI has a global DTI’s history began in DTI operates across maintains a fleet of footprint, with a 1984 with the founding diverse segments over 65,000 rental presence and service of Directional Rentals, including Directional Tool tools and drilling capabilities in all an equipment provider Rentals, Wellbore equipment major U.S. basins to offshore drillers Optimization Tools, Premium Tools and Other (1) 22 Permian 35,840 SF ~$130 Million DTI operates from DTI has an extensive DTI operates a 35,840 2022 revenue, 22 service centers, footprint across the square foot reflecting the shops, distribution prolific Permian Basin manufacturing & Company’s and repair centers including Midland & repair facility located established scale Delaware in Louisiana 1) Includes four international stocking points. See page 12 for additional detail. 6
The Rental Tool Business & DTI’s Value Proposition Why do E&P operators and some service providers prefer to rent rather than buy? Given the complexity of modern drilling, completions and workover programs, most drillers and service providers prefer to focus on core competencies and rely on third-parties for the rental, repair, inspection and inventory management of downhole drilling tools Customer Challenges DTI’s Value-Additive Solutions Topic DTI has the resources to make renting downhole tools a Outsources Logistics, Customers lack the willingness, resources and/or experience reliable and economical choice for customers including a to track, transport, store, maintain and inspect tubing, drill large physical infrastructure, proprietary inventory Inspection, Storage pipe and other equipment management system, as well as needed inspection, repair, and Maintenance and hardfacing to support the fleet of rental equipment By serving a broad customer base, DTI can efficiently Eliminates Equipment Inefficient to own comprehensive fleet of expensive deploy specialized equipment across major U.S. oil & gas equipment specifically designed for formations / regions Redeployment Risk regions Immediate DTI owns a wide variety of equipment available for use Modern well designs require highly specialized equipment Equipment 24/7, along with extensive machining capabilities to rapidly that is not typically carried on drilling or workover rigs meet customer needs Availability DTI’s inventory includes equipment required for extended Fill Many drillers and well service providers maintain only a reach laterals as well as a range of specialty or premium Equipment small core set of tubing and drill pipe products that are needed to withstand the rigors of deep Supply Gaps unconventional wells Focus Capex DTI’s rental equipment allows operators to focus capex Industry shift towards lean capital programs investment on core businesses On Core Operations Simplifies Working DTI as a service provider eliminates the need for an E&P The perception of excessive charges can lead to disputes operator to charge working interest partners a substantial Interest Partner among working interest partners fee for the purchase of equipment Expense Allocation 7
Expansive Offering to Supply Drilling Tools Required in a Typical Job Diverse and extensive inventory of tools to address the wide-ranging needs of oil & gas customers across all regions Blow Out Preventer Represents Key DTI Rental Product Crossover Subs Hevi-Wate Drill Pipe Drill Pipe Non-Magnetic Collar TM Drill-N-Ream TM Spiral Drill Collar RotoSteer Stabilizer Bit Sub 8
A Market Leader in Downhole Tools for the Oil & Gas Industry Leading provider of downhole drilling equipment rentals to North American onshore and offshore markets, as well as select international locations, with a highly competitive suite of differentiated products serving blue-chip E&P operators and large oilfield service companies Core Product and Service Offering Directional Tools Rental (“DTR”) Wellbore Optimization Tools Premium Tools (“Premium”) Other Products & Services (1) 60% of 2022 Revenue 20% of 2022 Revenue 18% of 2022 Revenue 3% of 2022 Revenue l Rental tools used in bottom l Sole North American distributor l Complete inventory of l Downhole Inspection Solutions TM hole assemblies (“BHA”) of the patented Drill-N-Ream , necessary handling tools for offers inspection services and adjacent to the drill bit a proprietary and patented running workstrings provides technical support for wellbore conditioning tool tool life analysis and BHA l More than 30 categories of l Offers tubulars for drilling, component development tools, including:l Distributor of composite casing workover and completion centralizers and specialty roller operations including:l Technical Services Group — Stabilizers reamers provides engineering, research — Drill Pipe — Drill Collars and product development l Emerging products include — Drill Collars TM TM — Roller Reamers RotoSteer and DrillSafe l Product Sales — Kellys Float Valve for Managed — Hole Openers — Downhole Tools Pressure Drilling — Pup Joints — Downhole Filters — Completion and Production — Tubing Tools — Sub Assemblies l American Petroleum Institute l Emerging Product Launch — Drilling Accessories (“API”) blowout preventers Team incubates new tools and (“BOPs”) and related pressure businesses before they reach control accessories critical scale Source: Company financials and management estimates. 9 1) Net of eliminations.
How Did We Get There? DTI Has a Long History of Success DTI’s history began in 1984 when it was founded as Directional Rentals to provide equipment to offshore drillers l In 2012, Hicks Energy Partners acquired a majority interest in Directional Rentals before merging with Allegiant Tool & Machine to become DTI l Since then, DTI has focused on strategically acquiring inventory and business units to become a leader in drilling tool rentals in North America 1984 2009 2013 2016 2018 2022 l Acquired: l Founded as l Opened Houston, l Acquired l Substantially l Established Directional Rentals TX and Casper, WY Schlumberger’s increased market exclusive — Premium Tools offices downhole tools share in North partnership for l Primarily rented — RIK, Incorporated TM inventory America RotoSteer stabilizers and sub-l Mike Domino — Stinger assemblies to joined the l Wayne Prejean and l Established l ~65,000 tools Production Valve offshore directional management team David Johnson partnership with l Sustains market — Friction Reduction drillers in the Gulf joined manufacturer of leading position Tools of Mexico (“GoM”) management team patented Drill-N- l Domestic TM — Cajun Plugs, a as CEO and CFO, Ream tool locations: 18 dissolvable frac respectively (including plug headquarters) 1984 Today 1991 2012 2014 2017 2019 2023 TM l Expanded offering l Hicks acquired l Acquired Reamco, l Drill-N-Ream l Achieved over 50% l After a successful to include non- majority interest in adding offshore average monthly market share in transaction with magnetic drill DTI tools and tool revenues exceed $1 North America in ROC Energy collars and sub- repair capabilities million DTR segment Acquisition Corp., — ~5,000 tools assemblies DTI became a l Rebranded as l Launched Downhole l Developed — Locations: 4 publicly traded Drilling Tools Inspection Solutions Customer Order l Purchased NOV company on June International, Inc. Management Portal l Achieved leading tools, significantly st 21 2023 under the and Support l Established Quality market share in increasing scale and ticker NASDAQ: DTI System Assurance team offshore GoM, capabilities (“COMPASS”) for and began API growing from 1 rig in customized rental certification 2013 to 12 rigs in tool management process 2017 10
Our Proven Track-Record in Executing & Integrating M&A Management boasts a proven track record in strategic acquisitions highlighted by the integration of 4 businesses since 2012 Select Acquisitions Target Rental Tools Year 2013 2014 2018 2018 Acquired l Purchased their entire l Manufactures, rents and l Full-service drill pipe l Provides downhole North American fleet of refurbishes downhole rental tool division drilling tools to Bottom Hole Assembly drilling tools and related specializing in directional drilling Components in products equipment for drilling, companies, serving exchange for a 4-year workover, completions customers in several key supply agreement and well intervention basins including the l Enabled DTI to enter the Permian, Rocky offshore market by Mountains, and Williston l Original agreement using the Reamco Description extended and is still in facility and API license effect through 2024 to accelerate path to quickly capture leading market share 11
Scale Matters: Operations Across All Major Operating Basins in North America 18 service centers, shops, distribution and repair centers located strategically across North America to service all major oil & gas basins, providing solutions with minimal logistics required Major US Basins Serviced by DTI ü Permian – Midlandü Eagle Fordü Anadarko / Woodford ü Permian – Delawareü Powder Riverü Granite Wash ü Marcellus / Uticaü DJ Basinü Tuscaloosa Trend Nisku, Alberta ü Bakken / Willistonü Haynesville ü Barnettü Gulf of Mexico Williston, ND Minot, ND Casper, WY Charleroi, PA Additional International Stocking Points Vernal, UT Bakersfield, CA Oklahoma City, OK Midland & Odessa, TX Carlsbad, NM Sibley, LA DTI Corporate Headquarters DTI Service Centers (DTR, DNR, & DIS): 9 TM Drill-N-Ream : 2 Houston, TX Broussard & Premium Tools Division (PTD): 2 New Iberia, LA Stocking Points (DTR & DNR): 2 Inspection and Repair (DIS & DMS): 1 Emerging Products: 1 12
Strong Permian Presence in both Midland and Delaware Basins DTI has an extensive footprint within the Permian Basin, providing numerous services to clients operating in one of the most prolific oil and gas basin (1) Midland DTR Campus Space (sq. ft.) 57,246 Acres 14 Segments Served DTR Midland DNR Facility Space (sq. ft.) 12,000 Acres 3.5 Carlsbad, NM Segments Served Multiple Midland, TX New Mexico (2) Odessa DMS Facility Odessa, TX Texas Space (sq. ft.) 9,000 Acres 5 Segments Served Multiple Odessa Premium Tools Facility Space (sq. ft.) 17,417 Acres 11 Segments Served Premium Carlsbad Facility Space (sq. ft.) 4,000 Acres 2.5 Segments Served DNR 1) Includes aggregate square footage from five buildings. 2) Downhole machining solutions. 13
Modernized Manufacturing and Repair Facility 35,840 square foot facility located on a ten-acre campus in Broussard, Louisiana l Machine and repair equipment ensures product quality, increases product life and improves fleet utilization l Facility equipment includes hollow spindle lathes, CNC mills, racking systems, manual lathes and in-house drill collar spiraling equipment l Machine shop reworks drill collars and hevi-wate drill pipe, spiraling of drill collars and anti-galling zinc phosphate applications of threading connections l A full-service welding and hard facing operation to support manufactured tools and enhance rental tool life l Ability to manufacture most of our rental tools enables cost reduction and control of supply chain for rental needs Raw Materials From Mill DTI Manufacturing Facility Tools Added to Fleet Damaged Tools 14
DTI’s COMPASS Order Management System = Key Differentiator DTI’s proprietary customer order management system provides valuable information to the company for use in making data-based capital allocation and pricing decisions Unique, Proprietary Software and Support System Customized, Automated and Accurate Reporting Full Catalog of Tools and Equipment Provides Customers with Centralized Order Management System Expedites Order Process Transaction Data Can be Analyzed for Capital Expenditure & Pricing Decision Making 15
ESG + Safety Are Integral to Our Success DTI is committed to environmental stewardship by: ü Performing continuous evaluations and implementing control measures to ensure minimization of waste Environmental ü Striving for the highest levels of operational proficiency to reduce rework, use of chemicals and waste ü Actively promoting recycling including extensive rental tool recycling and refurbishment programs ü Pursuing opportunities to redeploy equipment in support of energy transition markets such as geothermal, carbon capture and storage, as well as other renewable projects (1) DTI Historical TRIR The wellbeing of employees, customers, and Management focus on safety suppliers is rooted in DTI’s operations: 4.6 driving significant 4.2 improvement ü Identify and control exposures that can injure people, 3.4 Social interrupt production, or damage property, equipment 2.3 2.3 1.9 (+Safety) and material 1.4 1.3 1.2 0.5 ü Contributes to the welfare of employees and local communities through active participation in numerous 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 outings and charity events DTI’s leadership is focused on deriving long-term value for all stakeholders by: (2) ü Executive accountability through the election of an independent board Governanceü Strong internal controls ü Complying with federal, state, and local regulations 1) Total Recordable Incident Rate. 16 2) A majority of our directors are independent for the purposes of the applicable Nasdaq and Securities and Exchange Commission rules.
Overview of DTI’s Core Product and Service Offering ($Millions) Product / Service Offering 2020A – 2023E Revenue Profile Key Products / Features l Stabilizers (standard, directional,l Roller reamers integral blade, sleeve type, motor / $95 - $97 l Hole openers $78.0 MWD and RSS sleeve) Directional Tools l Pup joints $47.6 l Subs (rotary, side entry, reduced $41.2 Rental section, crossover, top drive saver)l Hardfacing l Steel drill collars l Non magnetic drill collars 2020A 2021A 2022A 2023E $25.3 $24 - $26 l Specialty roller reamers l Unique and value add products $17.8 $15.8 deployed by a focused group of field l Composite casing centralizers Wellbore sales and service professionals TM l DrillSafe float valve rentals for Optimization Tools TM l Patented Drill-N-Ream Wellbore managed pressure drilling Conditioning tool TM l Emerging RotoSteer Technology 2020A 2021A 2022A 2023E $26 - $28 $22.7 l Drill pipe and Hevi-Wate drill pipel BOPs l Drill collarsl Accumulators $8.9 Premium Toolsl Kellysl Hoses $6.3 l Pup jointsl Flanges l Tubingl Range of handling tools 2020A 2021A 2022A 2023E l Technical services groupl Downhole inspection solutions – non- destructive testing services — Sustaining engineering – research $5 - $7 $5.6 Other Products and and product development — Magnetic particle inspection liquid penetrant inspection $3.5 (1) l Product sales (downhole tool and Services $1.8 completion and production tools) — Ultrasonic testing l Emerging product launch team — Electro magnetic testing 2020A 2021A 2022A 2023E Source: Company financials and management estimates. 17 1) Net of eliminations.
Overview of Directional Tool Rentals Key Equipment Stabilizers Reduces drill string vibration and torque… Drill Collars Adds weight to the BHA to increase rate of penetration (“ROP”) and reduce vibration… Subs and Other Equipment Roller Reamers / Hole Openers Variety of subs, crossovers and handling tools used in Enlarges and conditions wellbore… the drill string 18
Overview of Wellbore Optimization Tools Specialty tools division with a focused group of field sales and service professionals providing rig site visits and customer service, enabling consistent product performance and customer satisfaction Products Offered Substantial Improvements in Wellbore Quality l Patented technology allows the tool to maintain TM Drill-N-Ream a market leading position (“DNR”) l Numerous benefits to the customer WellBore Conditioning (1)l Allows operators to extend length of wellbore at Tool a lower cost Specialty l Sealed bearing roller reamers Reamers, l Distributor for casing centralizers Casing Centralizers, l Specialty pressure control drill stem valve for TM DrillSafe managed pressure drilling Float Valves l 2022: finalized development l 2023: Commercially launched Jan 2023 Emerging Technology l Improves ROP, reduces torque and drag and TM “RotoSteer ” eliminates slides l Applicable to hundreds of locations 1) DTI distributes the DNR pursuant to a distribution agreement with Superior Drilling Products, Inc., the owner of the relevant patent. 19
Overview of Premium Tools Key Equipment DTI offers a wide array of premium tubulars for drilling, workover and completion operations, API blowout preventers and pressure control accessories as well as a comprehensive suite of related handling tools Tubulars Handling Tools API BOPs and Pressure Control Accessories 71 l Drill Pipe – 2 ⁄ to 5 ⁄ inch API bottleneck, slim-l Stabbing Guides – for tubing and drill pipel Blowout Preventers – 5M, 10M and 15M psi 82 hole, API, proprietary double shoulder-high torque l Drifts – for all pipe sizes (Teflon, steel and l Accumulators – diesel, electric and air powered connections aluminum) l Hoses – high pressure, fire retardant and steel 11 l Hevi-Wate Drill Pipe – 3 ⁄ to 5 ⁄ inch API 22 l Rotary Slips – for tubing, casing, drill pipe and flex bottleneck, slim-hole, API, proprietary double drill collars l Spools – spacers, adaptors and diverters shoulder-high torque connections l Safety Clamps – for pipe and collars l Double Studded Adaptors 11 l Drill Collars – 3 ⁄ to 9 ⁄ steel spiral and slick 82 l Manual Tongs – K-25 to K-70 hand tongs and HT- l Gate Valves – manual, hydraulic and air actuated 200 manual rotary tongs l Kellys – hex or square from 38 to 46 inch l Chokes – manual adjustable and fixed orifice l Elevators – slip grip, bottleneck and bushing l Pup Joints – drill pipe and tubing l Manifolds – skid mounted custom buffers types assembled to specification l Tubing – premium PH-6, CS-8 and API 8Rd with l Subs – TDS, wear, float, X-over, bit, lift and pump- 31 thread from 2 ⁄ to 4 ⁄ l Flanged Accessories – tees, crosses (flanged ins 82 and studded) l Stud Bolts – B7M H S service 2 l Chicksan Iron – loops, swivel joints and pups 20
Other Products and Services Products Offered Internal Support Services and Emerging Products l Independent inspection services equipment of all DTI divisions and select external customers Downhole l Critical to efficient operations Inspection Solutions l Services across North America including network of six domestic and one Canadian inspection facilities l Sustaining engineering Technical l Performance analysis Services l Product development Group l Technical support to quality assurance l Made-to-order downhole drilling tools l Completion and production Product Sales Product Sales l Production desander tool operations l Williston, ND manufacturing and distribution facility 21
Blue-Chip Customer Base Across E&Ps & OFS Companies DTI has established an exceptional customer base that includes blue-chip E&P operators and many of the largest oilfield services companies l First-call supplier for leading oilfield service providers in North America l Over the last decade, DTI has actively expanded its customer base to further diversify its customer mix − In the six months ending June 30, 2023, DTI’s two largest customers represented approximately 30% of revenue Revenue by Customer (%) Select DTI Customers Six months ended June 30, 2023 Top Two Customers 30% >40% of revenues from customers outside the Top 10 All Other Customers 70% 22
DTI Sales Team Covers Global Markets The Sales and Corporate Strategy teams cover customer decision makers at all organizations levels, globally ü DTI Sales Organization Coverage Sales Organization Covers Every Major U.S. Basin and Several North America International Attractive International Markets Mid Western Texas/New Latin California Rockies Louisiana Northeast Continent / Middle East Europe Canada Mexico America Central Bakersfield Calgary Casper Austin Northern LA Ohio Dallas Abu Dhabi Colombia Aberdeen ü Nisku Denver Houston Covington Pittsburgh Ft. Worth Dubai Mexico Customer “Stickiness” Enabled by Frequent GOM West Oklahoma Minot Midland Oman Trinidad Offshore Virginia City Interaction Across Multiple Layers of Management Watford City New Mexico Lafayette Tulsa Williston Odessa New Iberia (1) Revenue by Region New San Antonio Orleans ü Northeast Int'l / Other Mid Continent / 4% 1% Central 6% Rockies International Regions 7% Represent Key Growth Western Opportunities Canada Texas / 9% New Louisiana Mexico 13% 61% 1) January 1, 2023 through June 30, 2023 actuals. 23
Significant Upside Through Continued Consolidation DTI believes that its established M&A framework and robust M&A pipeline will allow it to rapidly consolidate the oilfield service rental tool industry l Has reviewed more than 100 potential acquisition targets, with approximately 20 targets in the current pipeline, 10 of which have been identified as addressing a near-term strategic priority Overview of DTI’s M&A Framework M&A Pipeline Leverage Existing DTI’s 325+ MSAs, many of which are with leading service Customer Relationships companies and E&P operators, can accelerate growth M&A Targets 100+ Reviewed Leverage DTI’s Large Facility Geographic presence in all major U.S. markets enables quick Footprint deployment of DTI’s product / service suite Commercialize What is Platform and experienced team can quickly commercialize Otherwise Just a Good Idea new technologies that otherwise have a poor path to market Active Targets in ~20 Strategic emphasis on products that reduce rig days per well Create Drilling Efficiencies Pipeline and therefore garner high rental rates Increase Product Continue expanding into higher value, more sophisticated Sophistication tools (e.g., mud motors, power sections, etc.) Near-Term Benefit from DTI’s business benefits from more than 300 years of Priority Management’s Expertise cumulative management experience 10 Targets Identified Broaden International Continue to strategically review international markets and Expansion potential distribution partners 24
Experience Matters! – The DTI Leadership Team Experienced, talented, and committed management team with history of success Wayne Prejean Mike Domino David Johnson Jim Rowell President & Chief President, Directional Tool Chief Financial VP, Premium Tools Executive Officer Rentals Division Officer Aldo Rodriguez Trent Pope Christian Middleton Rick Young VP of Sales & Corporate VP, Business Development VP, Finance VP, QHSE Development Wellbore Optimization Group & Corporate Support Ashley Lane David Cotten Chris Conner Veda Ragsdill Director, General Manager, Director, VP, International Business Development Technical Services Downhole Inspection Solutions Human Resources 25
Financial Overview and Growth Opportunities 26
Attractive Financial Profile ($Millions) Generated positive Adjusted EBITDA margins and cash flow through the pandemic, and now boasts among the top margins and cash flow profiles in the industry Revenue Commentary $150 - $158 $129.6 $77.4 Strong and $67.6 Increasing Revenue Profile 2020A 2021A 2022A 2023E Growth Rate 14% 67% 16% - 22% (1) Adjusted EBITDA $50 - $54 $41.2 Accelerating $15.7 Adj. EBITDA and $8.3 Margin Profile 2020A 2021A 2022A 2023E (2) % Margin 20% 32% 33% - 34% (3) Adjusted Free Cash Flow $17.4 Translating to $6 - $8 $4.4 $2.0 Positive Adj. Free Cash Flow Generation 2020A 2021A 2022A 2023E (4) % Margin 6% 13% 4% - 5% Source: Company financials and management estimates. 3) Adjusted Free Cash Flow is a non-GAAP measure. For a reconciliation of net income (loss) to Adjusted 1) Adjusted EBITDA is a non-GAAP measure. For a reconciliation of net income (loss) to Free Cash Flow for each of the periods presented, please see the Appendix. 27 Adjusted EBITDA for each of the periods presented, please see the Appendix. 4) Adjusted Free Cash Flow divided by revenue in the corresponding year. 2) Adjusted EBITDA divided by revenue in the corresponding year
Smart Capital Expenditures ($Millions) Increase in 2023 Growth Capital spending to support stronger adjusted free cash flow in 2024+ translating to lower YE 2023 adjusted free cash flow Commentary Components of Adjusted EBITDA $6 - $8 Adjusted Free Cash (1) Flow can be directly influenced by Growth CapEx strategy $17.4 $25 - $26 Growth CapEx is company funded $3.7 and increased as a percentage of $4.4 revenue in 2023 to support strong 2024+ $1.6 $19 - $20 $2.0 $20.0 adj. free cash flow $6.6 $9.8 Maintenance CapEx 2020A 2021A 2022A 2023E is funded by tool $(0.3) recovery revenue and Maintenance CapEx Growth CapEx Adj. Free Cash Flow is relatively steady- (2) % Maintenance CapEx % of Revenue 13% 15% 13% state as a percentage (2) Growth CapEx % of Revenue 2% 3% 16% of total revenue (3) Adj. Free Cash Flow % of EBITDA 28% 42% 12% - 15% Source: Company financials and management estimates. 1) Adjusted Free Cash Flow defined as Adjusted EBITDA less Gross Capital Expenditures 2) Maintenance and Growth percentages for FY 2023 represents the current forecasted split as of 6/30/23 28 3) Adjusted Free Cash Flow defined as Adjusted EBITDA less Gross Capital Expenditures
Strong Growth Driven by all DTI Products… ($Millions) Revenue Growth by Product CAGR ’20A – ’23E Total: 30% – 33% $150 - $158 $5 - $7 40% - 57% $129.6 $26 - $28 43% - 47% $3.5 $22.7 15% - 18% $24 - $26 $25.3 $77.4 $67.6 $5.6 $6.3 $1.8 $8.9 $17.8 $15.8 32% - 33% $95 - $97 $78.0 $47.6 $41.2 2020A 2021A 2022A 2023E DTR Wellbore Optimization Tools Premium Other Products and Services Source: Company financials and management estimates. 29 Note: Due to rounding numbers presented herein may not sum precisely to the totals provided.
Appendix 30
Reconciliation of Adjusted EBITDA (1)(2) ($ in thousands) 2020A 2021A 2022A 2023E Net income $(18,525) $2,101 $21,080 $11,500 - $19,000 Interest expense, net 2,954 1,229 477 500 – 1,500 Income tax expense/(benefit), net (5,034) (209) 3,697 5,000 – 6,000 Depreciation and amortization 23,814 21,718 19,709 21,500 – 22,500 Intangible impairment 3,869 - - - Monitoring fee 718 291 449 500 – 1,000 Reclassification from operating to other expense 39 - - - Other expense/(income) 77 233 (4,218) - Unrealized loss - trade securities 247 (157) - - Loss/(gain) on non-op assets (23) (25) (32) - PPP loan forgiveness - (8,575) - - Real estate sales proceeds - (899) - - (2) Stock option expense 158 32 - 1,661 (2) Transaction Expense - (899) - 5,838 Adjusted EBITDA $8,294 $15,739 $41,163 $50,000 – $54,000 Source: Company financials and management estimates. DTI is a December year-end company. Note: Due to rounding numbers presented herein may not sum precisely to the totals provided. 1) Net Income Adjustments for FY 2023 represent the current forecasted estimates as of 6/30/23 31 2) Stock Option Expense and Transaction Expense have not been given ranges as the expenses are actuals per the Form 10-Q filing on 8/14/23.
Reconciliation of Adjusted Free Cash Flow (1) ($ in thousands) 2020A 2021A 2022A 2023E Net income $(18,525) $2,101 $21,080 $11,500 - $19,000 Interest expense, net 2,954 1,229 477 500 – 1,500 Income tax expense/(benefit), net (5,034) (209) 3,697 5,000 – 6,000 Depreciation and amortization 23,814 21,718 19,709 21,500 – 22,500 Intangible impairment 3,869 - - - Monitoring fee 718 291 449 500 – 1,000 Reclassification from operating to other expense 39 - - - Other expense/(income) 77 233 (4,218) - Unrealized loss - trade securities 247 (157) - - Loss/(gain) on non-op assets (23) (25) (32) - PPP loan forgiveness - (8,575) - - Real estate sales proceeds - (899) - - (2) Stock option expense 158 32 - 1,661 (2) Transaction Expense - (899) - 5,838 Gross Capital Expenditures (6,301) (11,837) (23,753) (44, 000) – (46,000) Adjusted Free Cash Flow $1,993 $4,352 $17,410 $6,000 – $8,000 Source: Company financials and management estimates. DTI is a December year-end company. Note: Due to rounding numbers presented herein may not sum precisely to the totals provided. 1) Net Income Adjustments for FY 2023 represent the current forecasted estimates as of 6/30/23 32 2) Stock Option Expense and Transaction Expense have not been given ranges as the expenses are actuals per the Form 10-Q filing on 8/14/23.
Risk Factors Risk Factors Summary Certain factors may have a material adverse effect on our business, financial condition and results of operations. The risks and uncertainties described below are not the only ones we face. Additional risks and uncertainties that we are unaware of, or that we currently believe are not material, may also become important factors that adversely affect our business. If any of the following risks actually occurs, our business, financial condition, results of operations and future prospects could be materially and adversely affected. In that event, the trading price of our common stock following the business combination could decline, and you could lose part or all of your investment. Potential investors are encouraged to review the “Risk Factors” section of our proxy statement/prospectus/consent solicitation statement filed with the SEC on May 12, 2023. Risks Relating to Our Business and Industry • We are dependent upon the level of activity in the oil and gas industry, which is volatile and has caused, and may in the future cause, fluctuations in our operating results. Volatility and declines in oil and gas prices may adversely affect our financial condition and results of operation. • We operate in a highly competitive industry, and the introduction of new products and technologies by our competitors, as well as the expiration of the intellectual property rights protecting our products and technologies, could lead to lower revenue and earnings. • We are dependent on a relatively small number of customers in a single industry. The loss of an important customer could adversely affect our results of operations and financial condition. • A portion of our revenue is derived from our non-United States operations and sales, which exposes us to additional risks inherent in doing business in other countries. • If we fail to continue to improve and enhance the functionality, performance, reliability and design of our products in a manner that responds to our customers’ evolving needs, our business may be adversely affected. • Quality inconsistency, defects and product failures could harm our reputation and adversely affect our business, financial condition, results of operations and prospects. • We may be unable to manage our growth effectively. • A financial downturn could negatively affect our business, results of operations, financial condition and liquidity. • Inflation may increase the cost of operations beyond what we can recover through price increases. • Events outside of our control, including an epidemic or outbreak of an infectious disease, such as COVID-19, may materially adversely affect our business. • Cyberattacks or other failures in telecommunications or IT systems could result in client or proprietary information theft, data corruption and significant disruption of our business operations. Our services may be perceived as not being secure, clients may curtail or stop using our services and we may incur significant legal and financial exposure and liabilities. • If we fail to attract and retain qualified management and skilled technical personnel, our business may be adversely affected. • We may incur indebtedness following the business combination that could adversely affect our business. • The terms and covenants in our existing indebtedness restrict our ability to engage in some business and financial transactions, which could adversely affect our business. • Our customers and the third parties with whom we contract are participants in the oil and gas, manufacturing, engineering and various other industries and are therefore subject to a number of risks specific to their industries, which directly or indirectly subjects our business to many of the same risks to which their respective operations are subject. • If the security measures of the third parties with whom we contract are breached and unauthorized access is obtained to client or proprietary data or our IT systems, we may incur significant legal and financial exposure and liabilities. Risks Relating to Legal and Regulatory Matters • We could be adversely affected if we fail to comply with any of the numerous existing or future federal, state, local and foreign laws, regulations and policies that govern environmental protection, manufacturing and other matters applicable to our businesses. • The legal and regulatory landscape concerning oil & gas is complex and constantly changing. The adoption of any future federal, state, local or foreign laws or regulations imposing reporting obligations on, banning or in any other way limiting hydraulic fracturing, land or offshore drilling, or any other aspect of oil and gas exploration could make it more difficult for our clients to complete natural gas and oil wells, which could have a material adverse effect on our business, results of operations and financial condition. • We may be unable to protect our proprietary rights in our products, technologies and processes. • Legislative or regulatory initiatives, conservation measures or technological advances could reduce demand for oil and gas and, in turn, reduce demand for our products. • Climate change laws and regulations restricting emissions of greenhouse gasses could result in increased operating costs and reduced demand for our products. • Our business exposes us to potential environmental, product or personal injury liability. • We may not have adequate insurance for potential environmental, product or personal injury liabilities. 33
Risk Factors (Cont’d) Risks Relating to Ownership of Our Common Stock • We may not meet the expectations of the market or achieve the performance indicated in this Presentation. • The price of our securities may be volatile and may trade significantly below the price you pay for them. • Our financial projections may not prove to be reflective of actual future results. • There may be circumstances in which the interests of our significant stockholders could conflict with the interests of our other stockholders. • We may issue additional shares of our common stock or other equity securities, and such issuances could reduce the price of our common stock and dilute your ownership interest. • Nasdaq may delist our common stock from trading, and such delisting could limit investors’ ability to execute transactions in our common stock and subject us to additional trading restrictions. 34
Recent Milestones 35
36
2023 Financial Outlook Adjusting outlook for growth and profitability in 2023 § Rig counts have declined more than our previous full year revenue and Adjusted EBITDA guidance ü We still expect to achieve attractive margins and growth in 2023 ü Revenue and Adjusted EBITDA forecasted to grow between 16% - 22% and 21% - 32% vs. 2022, respectively ü The downward adjustment in guidance is not attributable to weakness in any particular product as product-level Adjusted EBITDA margins remain strong ü Increase in 2023 Growth Capital spending to support stronger Adjusted Free Cash flow in 2024 and beyond, translating to lower YE 2023 Adjusted Free Cash Flow Key Guidance Summary (1) Metric Previous Guidance Current Guidance Revenue ($ million) $163.8 $150 - $158 Adjusted EBITDA ($ million) $58.0 $50 - $54 Adjusted EBITDA Margin 35.4% 33% - 34% (2) Adjusted Free Cash Flow ($ million) $18.6 $6 - $8 ü Increase in 2023 Growth Capital spending to support stronger Adj. Free Cash Flow in 2024 and beyond, translating to lower YE 2023 Adj. Free Cash Flow 1) Reflects financial outlook communicated on April 18, 2023. 37 2) Adjusted Free Cash Flow defined as Adjusted EBITDA less Gross Capital Expenditures